Removing The Armrest Receiver - Sunrise Medical Quickie Sedeo Lite Service Instructions Manual

Removing the armrest receiver

Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the armrest
receiver.
• Rebuild the wheelchair in reverse order once completed.
Fig. 6.5.27
1. Unscrew and remove (A) bolt using the 5mm Hex key
Tightening torque for (A) bolt is 10Nm
Fig. 6.5.28
2. Remove the armrest receiver (B)
Removing the segment attached to the armrest receiver
Fig. 6.5.29
1. Unscrew and remove (A) using the 3mm Hex key, then remove
the segment from the armrest receiver
Tightening torque for (A) bolt is 3Nm
Sedeo ERGO Rev.A
Tools used
5
A
1
B
3
1
A
2
B
Fig. 6.5.27
Fig. 6.5.28
Fig. 6.5.29
111