Removal And Reassembly Of Adjustment Wheel Set On Tool Adjustable Legrest - Sunrise Medical Quickie Sedeo Lite Service Instructions Manual

Removal and reassembly of adjustment wheel set on tool adjustable legrest
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing and
the reassembly of the adjustment wheel set on a tool
adjustable legrest.
• Tightening torque for bolts is 9Nm.
Fig. 6.2.55
1. Remove bolt (A) from the adjustment wheel set
Fig. 6.2.56
2. Remove axle (B) from the opposite side of the wheel set
Fig. 6.2.57
3. Pull apart upper section (C) from the lower section
NOTE: Spring used in the centre may be destroyed and need to be
replaced.
Sedeo PRO + LITE Rev.A
Tools used
5
1
A
C
Fig. 6.2.55
Fig. 6.2.56
2
B
Fig. 6.2.57
3
39