Removal Of Entire Armrest Unit With Bracket From Seat Plate; Fig. 6.3.49; Tightening Torque For Bolts Is 9Nm - Sunrise Medical Quickie Sedeo Lite Service Instructions Manual

Removal of entire armrest unit with bracket from seat plate
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the entire
armrest unit from the seat plate.
• Rebuild the wheelchair in reverse order once completed.
• Remove cable-ties securing controller cable before taking
apart.

• Tightening torque for bolts is 9Nm.

Fig. 6.3.48
1. Remove bolts (A) from bracket attached to seat plate (B)

Fig. 6.3.49

2. Remove entire armrest unit (B) from seat plate
Sedeo PRO Rev.A
Tools used
5
B
B
Fig. 6.3.48
A
1
A
Fig. 6.3.49
2
1
A
69