Removal of headrest mount and bracket from backrest frame
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the headrest
mount and bracket from the backrest frame.
• Rebuild the wheelchair in reverse order once completed.
• Tightening torque for bolts is 4Nm.
Fig. 6.3.40
1. Remove 4 (A) bolts
Fig. 6.3.41
2. Unscrew and remove mount and bracket (B) from backrest frame
To remove mount from bracket
Fig. 6.3.42
3. Unscrew and remove 4 (C) bolts and and pull mount (D) from
bracket (E)
66
Tools used
1
A
2
B
3
C
Fig. 6.3.40
Fig. 6.3.41
Fig. 6.3.42
E
D
Sedeo PRO Rev.A