Removal of the hanger receiver
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the hanger
receiver from the seat plate.
• Rebuild the wheelchair in reverse order once completed.
Fig. 6.2.23
1. Loosen (A) bolt
NOTE: Do not remove bolt. The clamping mechanism may stick
therefore it maybe necessary to gently tap end of bolt (A) to free the
mechanism.
Tightening torque for bolts is 10Nm
Fig. 6.2.24
2. Unscrew and remove bolt (B) from underneath the seat plate
Tightening torque for bolts is 6Nm
Fig. 6.2.25
3. Remove hanger receiver (C) from seat
26
Tools used
5
A
1
3
C
Fig. 6.2.23
Fig. 6.2.24
2
B
Fig. 6.2.25
Sedeo PRO + LITE Rev.A