Removing the armpad cushion from the armrest
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the armpad
cushion from the armrest assembly.
• Rebuild the wheelchair in reverse order once completed.
• Tightening torque for bolts is 6Nm.
Fig. 6.2.68
1. Unscrew and remove 2 (A) bolts
Fig. 6.2.69
2. Remove armpad cushion (B) from the assembly
Sedeo PRO + LITE Rev.A
Tools used
5
A
B
2
Fig. 6.2.68
1
A
Fig. 6.2.69
43