Removing the skirt guard from the armrest
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the skirt
guard from the legrest assembly.
• Rebuild the wheelchair in reverse order once completed.
• Tightening torque for bolts is 9Nm.
Fig. 6.2.72
1. Unscrew and remove 2 (A) bolts from the base of the armrest
assembly into the seat base
Fig. 6.2.73
2. Remove armrest assembly (B) from t-nuts in the seat base
Sedeo PRO + LITE Rev.A
Tools used
5
1
A
2
B
Fig. 6.2.72
Fig. 6.2.73
45