Removal of gas strut/actuator from manual/powered adjustable legrest
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the gas
strut/actuator from a manual/powered adjustable legrest.
• Rebuild the wheelchair in reverse order once completed.
• Tightening torque for bolts is 5Nm.
Fig. 6.2.18 shows the starting position of the legrest assembly
Fig. 6.2.19
1. Unscrew and remove bolt (A) then remove axle (B)
Fig. 6.2.20
2. Unscrew and remove 2 bolts (C) from the lower part of the
legrest assembly
24
Tools used
4
1
A
2
C
Fig. 6.2.18
Fig. 6.2.19
B
Fig. 6.2.20
Sedeo PRO + LITE Rev.A