Removal of the footplate from powered centre-mount legrest
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the footplate
from a powered centre-mount legrest.
• Rebuild the wheelchair in reverse order once completed.
• Tightening torque for bolts is 9Nm.
Fig. 6.2.29
1. Unscrew and remove 2 (A) bolts from each side from the t-nuts
on front of the legrest assembly, then remove the footplates (B)
Sedeo PRO + LITE Rev.A
Tools used
5
A
1
B
Fig. 6.2.29
29