Removal Of Armrest Unit From Bracket; Fig. 6.3.50 - Sunrise Medical Quickie Sedeo Lite Service Instructions Manual

Removal of armrest unit from bracket

Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the armrest
from the bracket attached to the seat plate.
• Rebuild the wheelchair in reverse order once completed.
• Disconnect cables before taking apart.
• Tightening torque for bolts is 9Nm.

Fig. 6.3.50

1. Unscrew and remove (A) and, using a screwdriver, press and hold
in black plunger (B)
Fig. 6.3.51
2. Whilst pressing and holding the black plunger, pull out entire
armrest unit from bracket (C)
70
Tools used
5
A
1
C
B
2
1
Sedeo PRO Rev.A
Fig. 6.3.50
Fig. 6.3.51
A