Removal Of Anti-Shear Mechanism From Backrest Frame - Sunrise Medical Quickie Sedeo Lite Service Instructions Manual

Removal of anti-shear mechanism from backrest frame
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the anti-
shear backrest unit from the backrest frame.
• Rebuild the wheelchair in reverse order once completed.
• T-nuts remain in the extrusion, they can be removed
through the wider slot section.
• Tightening torque for bolts is 9Nm.
Disconnect cables before taking apart.
Fig. 6.3.16
1. Remove the 2 bolts (A) near the top of the unit
Fig. 6.3.17
2. Remove the bolt (B) near the bottom of the unit
Fig. 6.3.18
3. Remove bolt and washer (C)
58
Tools used
5
13
2
3
C
Fig. 6.3.16
1
A
Fig. 6.3.17
B
Fig. 6.3.18
Sedeo PRO Rev.A