Removing The Backrest Shell From The Backrest - Sunrise Medical Quickie Sedeo Lite Service Instructions Manual

Removing the backrest shell from the backrest

Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the
backrest shell from the backrest.
• Rebuild the wheelchair in reverse order once completed.
Before completing, you must first remove the back cushion as illustrated
in Fig. 6.5.1
Fig. 6.5.13
1. Unscrew and remove 4 x (A) bolts from the backrest shell
Tightening for (A) bolts is 9Nm
Fig. 6.5.14
2. Remove backrest shell (B) from the backrest
NOTE: The JAY 3 Backrest shell can also be removed in the same way
by removing the same 4 x (A) bolts
106
Tools used
5
Fig. 6.5.13
1
A
Fig. 6.5.14
2
B
Sedeo ERGO Rev.A