Removing the lateral thoracic support
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the lateral
thoracic support.
• Rebuild the wheelchair in reverse order once completed.
• Tightening torque for bolts is 10Nm.
Fig. 6.4.36
1. Unscrew and remove the locking levers (A)
Fig. 6.4.37
2. Slide off backrest frame (B) from main assembly
3. Unscrew and remove bolt (C) from the rear of the lateral thoracic
support
Fig. 6.4.38
4. Slide lateral thoracic support (D) down the backrest frame tube
Sedeo LITE Rev.A
Tools used
6
1
A
3
C
2
B
4
D
Fig. 6.4.36
Fig. 6.4.37
Fig. 6.4.38
91