Quick release pin removal from backrest cushion
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the quick
release pin from the backrest cushion.
• Rebuild the wheelchair in reverse order once completed.
• Tightening torque for bolts is 6Nm.
Fig. 6.3.14
(As required)
1. Unscrew and remove (A) and remove (B) from backrest cushion
2. Unscrew and remove (C) and remove (D) from backrest cushion
56
Tools used
5
B
1
A
D
2
C
Fig. 6.3.14
Sedeo PRO Rev.A