Removing the front caps
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the front
caps from the seat rail.
• Rebuild the wheelchair in reverse order once completed.
Fig. 6.5.39
1. Unscrew and remove (A) bolt from the underside of the front cap
Tightening torque for (A) bolts is 4Nm
Fig. 6.5.40
2. Remove front cap (B)
116
Tools used
3
1
A
B
2
Fig. 6.5.39
Fig. 6.5.40
Sedeo ERGO Rev.A