Removal Of Calf Pad And Cushion From Swing Away Legrest - Sunrise Medical Quickie Sedeo Lite Service Instructions Manual

Removal of calf pad and cushion from swing away legrest
Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the calf pad
and cushion from a swing away legrest.
• Rebuild the wheelchair in reverse order once completed.
• T-nuts remain in the extrusion, they can be removed
through the wider slot section.
• Tightening torque for bolts is 9Nm.
Fig. 6.2.13 shows the starting position of the calf pad assembly
Fig. 6.2.14
1. Unscrew and remove (A) bolts from t-nuts in legrest assembly
Fig. 6.2.15 shows the calf pad from the rear of the assembly
22
Tools used
5
B
Fig. 6.2.13
Fig. 6.2.14
1
A
Fig. 6.2.15
Sedeo PRO + LITE Rev.A