Elevating Legrest Adjustment (Option); Center Mount Hanger Adjustment - Sunrise Medical Zippie Q300 M Mini Manual

®
Zippie Seating
5.11 Elevating legrest adjustment (Option) (Fig 5.16)
1. Footplate height adjustment
a. To raise footrest, loosen the two bolts (L) that hold the extension tube and footplate in place.
b. Adjust the footplate up or down, and tighten the hardware (L).
2. Calf pad adjustment
a. Remove the securing screw (M).
b. Move calf pads to desired height.
c. Re-tighten the screws (M) through adjusted hole.

5.12 Center mount hanger adjustment

1. Removing the assembly (Fig 5.17)
a. Remove the four screws (N) and slide the footrest assembly out of the receiver.
2. Footplate height adjustment (Fig 5.18)
a. Remove the six securing screws (O).
b. Move the footplate up or down to the desired height.
c. Attach again screws (O) through adjusted holes and tighten the hardware.
3. Calf pad adjustment (Fig 5.19)
a. Remove the two securing screws (P).
b. Move calf pads to desired height.
c. Attach again screws (P) through adjusted holes.
255249 Rev. A
5.0 SETTING UP THE SEATING SYSTEM
16
O
P
M
L
Fig.5.16
N
Fig.5.17
Fig.5.18
Fig.5.19