Table of Contents
Advertisement
4.8 Pre-set Fixed center mount legrest
Lower leg length (Fig 4.20)
1. Unscrew and remove (A).
2. Adjust (B) to the desired position.
3. Replace and tighten (A).
Ankle angle (Fig 4.21)
1. Flip up (A).
2. Turn (B) in order to adjust the ankle angle as desired.
3. Fold (A) down.
DANGER! / WARNING!
• After adjustment and with the seat in its normal drive position:
Ensure there Is a gap of, (>25 mm.), between the floor and the
footplate at all times.
• Perform this test with the user sitting in the chair loading the legrest
• Using the chair with the legrest set too low might result in personal
injury or damage to the wheelchair and its surroundings.
Calf pad height (Fig 4.22)
1. Unscrew and remove (A).
2. Adjust (B) to the desired position.
3. Tighten (A).
Zippie & Teens Seat Rev. A
A
A
A
2
A
1
B
2
A
B
Fig. 4.20
M5
1
13mm
3
M5
13mm
B
Fig. 4.21
M4
2
13mm
Fig. 4.22
M5
1
13mm
3
M5
13mm
15
Advertisement
Table of Contents
