Replacing The Cutter Unit; Cutter Unit; Cutter Un�T; Replac�Ng The Cutter Un�T - Canon imagePROGRAF IPF9100 User Manual

Cutter Unit

Cutter Unit
A reaplacement Cutter Unit.
•
Cutter Unit CT-06
Note
•
For instructions on replacing the Cutter Unit, see "Replacing the Cutter Unit". (→P.703)

Replacing the Cutter Unit

Note
•
For information on compatible Cutter Unit, see "Cutter Unit". (→P.703)
1.
Turn the printer on. (→P.18)
2.
Press the Menu button to display MAIN MENU.
3.
Press ▲ or ▼ to select Maintenance, and then press the ► button.
4.
Press ▲ or ▼ to select Change Cutter, and then press the ► button.
5.
Press ▲ or ▼ to select Yes, and then press the OK button.
After the Carriage is centered, a message is shown on the Display Screen instructing you to
open the Top Cover.
Note
•
If you do not respond within two minutes, cutter replacement is canceled and the printer goes online
automatically. In this case, repeat this procedure.
6.
Open the Top Cover.
Cutter Unit
Maintenance 703