Canon imagePROGRAF IPF9100 User Manual page 195

3.
Pull out the roll paper evenly on both ends, insert the roll paper in the Paper Feed Slot (a), and
advance the roll paper until the roll paper touches the Paper Retainer.
After the paper reaches the Paper Retainer, it is automatically advanced over the Platen.
Important
•
Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the
printing quality.
•
If the paper is wrinkled or warped, straighten it out before loading it.
•
When loading paper that curls easily, lift the Release Lever to manually pull out the roll paper over
the Platen.
•
Load the roll so that there is no gap between the right edge of the paper and the Roll Holder.
4.
Lower the Ejection Guide.
Handling rolls
Handling Paper 181