The Printer - Canon imagePROGRAF IPF9100 User Manual

Output Stacker
Using the Output Stacker in the position for ejection in the front of

the printer

You can also set the Output Stacker to the following position for large-format printing or when printing on
delicate paper.
Note
•
Always choose Cutting Mode > Eject when the Output Stacker is in the position for ejection in the front
of the printer. If you choose Automatic, printed documents may be damaged. (→P.191)
•
During ejection in the front of the printer, be especially careful when using delicate paper or paper
that curls easily.
•
With some types of paper, the leading edge may curl or bend during ejection. In this case, straighten out
the paper. Printed documents may be damaged if the paper is curled or bent.
•
Some types of paper may get caught between the Ejection Guide and Output Stacker during ejection.
In this case, free the paper from where it is caught. Printed documents may be damaged if the paper
gets caught.
1.
Lift the Basket Rod gently to release the lock, lower the stacker toward the front, and push it all
the way back.
222 Handling Paper