Canon imagePROGRAF IPF9100 User Manual page 321

7.
A
In the Media Type list, select the type of paper that is loaded. In this case, click Glossy
Photo Paper.
A
In the Media Type setting, choose the type of paper for printing, such as Glossy Paper,
Coated Paper, and so on. Make sure the paper you select is loaded in the printer.
Note
•
The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. (See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).)
8.
After conrming that
Target list.
Caution
•
Photo (Monochrome) may not be available for all types of paper.
Note
•
You can check the settings values selected in the
9.
Access the Page Setup pane.
10.
Click Roll Paper in the
D
Easy Settings is selected, click Photo (Monochrome) in the
A
Media Source list.
Print quality and color settings
E
Print Target list by clicking
E
Print
F
View set.
Enhanced Printing Options 307