Canon imagePROGRAF IPF9100 User Manual page 737

To protect the internal parts in transit, always follow the steps below before transferring the printer to a new
location. Refer to the Quick Start Guide for details on packing the printer and installing it after transfer.
Caution
•
Avoid tipping the printer excessively in transit. Ink inside the printer may leak and cause stains. If it is
necessary to stand the printer up or tilt it, contact your Canon dealer.
1.
Remove the paper.
•
Roll
(→P.184)
(→P.179)
•
Sheet
(→P.214)
2.
Press the Menu button to display MAIN MENU.
3.
Press ▲ or ▼ to select Maintenance, and then press the ► button.
4.
Press ▲ or ▼ to select Move Printer, and then press the ► button.
5.
Press ▲ or ▼ to select the level of transfer, and then press the OK button.
The printer now starts preparing for transfer.
Under Level 1 conditions, follow the procedure starting with step 12. There is no need to remove
Ink Tank.
When you are nished preparing to transfer the printer under Level 2 or Level 3 conditions, the
Display Screen prompts you to open the Ink Tank Cover. You must remove the Ink Tank at this
point. Follow the procedure starting with step 6.
6.
Open the left and right Ink Tank Covers.
Other Maintenance
Maintenance 723