Canon imagePROGRAF IPF9100 User Manual page 319

5.
After conrming that
Target list.
Caution
•
Photo (Monochrome) may not be available for all types of paper.
Note
•
You can check the settings values selected in the
6.
Click the Page Setup tab to display the Page Setup sheet.
7.
A
In the Page Size list, click the size of the original as specied in the application. In this case,
click 10"x12".
8.
Click Roll Paper in the
9.
Select the width of the loaded roll in the
Roll (254.0mm), and then click OK.
10.
Specify additional printing conditions.
For details on available printing conditions, see "Printer Driver Settings (Windows)". (→P.506)
11.
Conrm the print settings and print as desired.
Note
•
For tips on conrming print settings, see "Conrming Print Settings (Windows)". (→P.508)
D
Easy Settings is selected, click Photo (Monochrome) in the
L
Media Source list.
M
E
Print Target list by clicking
Roll Paper Width list. In this case, click 10-in.
Print quality and color settings
E
Print
F
View Settings.
Enhanced Printing Options 305