Activating Appletalk On The Printer - Canon imagePROGRAF IPF9100 User Manual

Conguring the Destination for AppleTalk Network
(Macintosh)
To print over an AppleTalk network, activate the AppleTalk protocol and congure the destination as follows.

Activating AppleTalk on the printer

Important
•
By factory default, the AppleTalk protocol is disabled on the printer.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Interface Setup, and then press the ► button.
3.
Press ▲ or ▼ to select AppleTalk, and then press the ► button.
4.
Press ▲ or ▼ to select On, and then press the OK button.
5.
Press the Online button to bring the printer online.
If any of the settings is changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
•
By using RemoteUI, you can also specify the object name used by AppleTalk, as well as the printer
zone name.
For details on RemoteUI, see "Using RemoteUI". (→P.622)
Important
•
Be sure to complete step 3. This will activate the values you have entered.
Network Setting (Macintosh)
Network Setting 639