Cutter Unit
Cutter Unit
Cutter Unit
A reaplacement Cutter Unit.
•
Cutter Unit CT-06
Note
•
For instructions on replacing the Cutter Unit, see "Replacing the Cutter Unit". (→P.702)
Replacing the Cutter Unit
Note
•
For information on compatible Cutter Unit, see "Cutter Unit". (→P.702)
1.
Turn the printer on. (→P.19)
2.
Press the Menu button to display MAIN MENU.
3.
Press ▲ or ▼ to select Maintenance, and then press the ► button.
4.
Press ▲ or ▼ to select Change Cutter, and then press the ► button.
5.
Press ▲ or ▼ to select Yes, and then press the OK button.
After the Carriage is centered, a message is shown on the Display Screen instructing you to
open the Top Cover.
Note
•
If you do not respond within two minutes, cutter replacement is canceled and the printer goes online
automatically. In this case, repeat this procedure.
6.
Open the Top Cover.
702 Maintenance