Configuring The Ip Address Using The Printer Control Panel - Canon imagePROGRAF IPF9100 User Manual

Network Setting
Conguring the IP Address Using the Printer Control
Panel
This topic describes how to congure the printer's IP address on the Control Panel.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Interface Setup, and then press the ► button.
3.
Press ▲ or ▼ to select TCP/IP, and then press the ► button.
4.
Press ▲ or ▼ to select IP Setting, and then press the ► button.
5.
Press ▲ or ▼ to select IP Address, and then press the ► button.
6.
Press ◄ or ► to move to another digit for numerical input.
7.
Press ▲ or ▼ to select the number, and then press the OK button.
Note
•
Hold down ▲ or ▼ to increase or decrease the value continuously.
8.
Repeat steps 6-7 to enter the IP address assigned to the printer.
9.
Press the Online button to bring the printer online.
If any of the settings are changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
•
If an error message is displayed, check the settings and correct any invalid values.
•
To cancel the setup process, hold down the Stop button for a second or more.
Important
•
Be sure to complete step 6. This will activate the values you have entered.
•
You can also specify the subnet mask and default gateway on the Control Panel.
618 Network Setting