Canon imagePROGRAF IPF9100 User Manual page 69

Maintenance
Setting Item
Repl. maint cart
Replace P.head
Repl. S. Cleaner
Change Cutter
Move Printer
Description, Instructions
When replacing the Maintenance Cartridge , choose Yes and follow the
instructions on the screen. (→P.706)
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
When replacing the Printhead , choose Yes and follow the instructions
on the screen. (→P.695)
When replacing the Shaft Cleaner , choose Yes and follow the
instructions on the screen. (→P.706)
When replacing the Cutter Unit , choose Yes and follow the instructions
on the screen. (→P.703)
You can also reset the cut counter after the Cutter Unit is replaced.
When transferring the printer to another location, choose the level of
transfer and follow the instructions on the screen. (→P.722)
Control Panel
Printer Parts 55