Canon imagePROGRAF IPF9100 User Manual page 252

Media take-up unit
5.
Press ▲ or ▼ to select Paper Cutting, and then press the ► button.
6.
Press ▲ or ▼ to select Yes. As you hold the trailing edge of the printed document, press the
OK button.
The roll is now cut.
Important
•
Always hold the trailing edge of printed documents when cutting rolls. If you do not hold the
documents, they may fall on the oor and the printed surface may become soiled.
7.
Hold the trailing edge of the printed document and press the ▼ button on the Media Take-up Unit
to rewind the printed documents.
Apply adhesive tape to the rewound paper to hold it in place, if necessary.
Important
•
Be careful not to scratch the printed surface.
8.
Turn off the Media Take-up Unit by pushing in the Rewind Mode Switch.
238 Handling Paper