Borderless Printing By Resizing Originals To Match The Paper Size (Windows); Borderless Pr�Nt�Ng By Res�Z�Ng Or�G�Nals To Match The Paper S�Ze (W�Ndows) - Canon imagePROGRAF IPF9100 User Manual

Borderless Printing
Borderless Printing by Resizing Originals to Match the
Paper Size (Windows)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the
following example.
•
Document: Any type
•
Page size: 10×12 inches (254.0×304.8 mm)
•
Paper: Roll
•
Paper type: Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
1.
In the application, create an original that takes up the entire space of the paper size.
Note
•
If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
2.
Choose Print in the application menu.
3.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.538)
4.
Make sure the Main sheet is displayed.
5.
A
In the Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
6.
Select the print target in the
386 Enhanced Printing Options
E
Print Target list.