Other Messages - Canon imagePROGRAF IPF9100 User Manual

•
Cannot adjust printhead. (→P.779)
•
Mail box full. Delete unwanted data on your computer to resume printing. (→P.783)
•
Mail box full. Cannot save. (→P.783)
•
Rewinding error. (→P.774)
•
Media take-up unit ready. (→P.774)
•
Multi-sensor error (→P.786)
•
Maintenance cartridge full. (→P.782)
•
Maintenance cartridge problem. (→P.782)
•
No maintenance cartridge. (→P.782)
•
No Maintenance Cartridge capacity. (→P.782)
•
Paper Mismatch (→P.766)
•
Paper jam. (→P.772)
•
Paper loaded askew. (→P.771)
•
Papr Size Mismatch (→P.767)
•
Paper size not detected. (→P.772)
•
Papr Type Mismatch (→P.766)
•
Leading edge detection error. (→P.772)
•
Cannot feed paper. (→P.772)
•
Cannot cut paper. (→P.773)
•
Rel lever is in wrong position. (→P.773)
•
The roll is empty. (→P.774)
•
Roll printing is selected. (→P.769)
•
Roll printing is selected, but sheets are loaded. (→P.769)
Error messages (if no action can be taken)
•
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) (→P.786)
•
ERROR Exxx-xxxx (x represents a letter or number) (→P.785)

Other Messages

These messages do not prevent printer operation. Check the information on the Display Screen and take
action as necessary. Messages requiring special attention are as follows:
•
Remaining level of the ink cannot be correctly detected. (→P.777)
•
Excessive temperature or humidity. (→P.779)
•
Cannot execute this command. Use other paper. (→P.778)
Responding to Messages
Error Message 765