Noise From The Exit Roller Drive - Konica Minolta bizhub C650 Technical Bulletin

SYMPTOM
Unusual noise may be generated from the exit roller drive gears.
C451 / C550 / C650
CAUSE
The drive gear bushing is worn.
FIELD ACTION
Replace the cam and the bushing. Both parts
must be replaced as a set.
Description
Cam A0P0897300
Bushing A00JP89000
These parts are already installed in models
552, 652, C452, C552, C652, C552DS, and
C652DS.
C451 / C550 / C650
C452 / C552 / C652 / C552DS / C652DS
FIELD ACTION
Apply Drysurf if there is any noise from this area.
Page 3 of 18

Noise from the Exit Roller Drive

Part No.
552 / 652
Drive
gears
Shaft
Cam
RETURN TO
CONTENTS
Cam
Bushing
December 19, 2011