Safety Instructions; Notes For The Operator; Notes For The Service Personnel - Heraeus HS 9 Service Manual

Service Instructions HERAsafe HS/12/18
1.

Safety instructions

1.1

Notes for the operator

This unit has been manufactured in keeping with the
latest technological developments and is operationally
safe. However, the unit may present potential haz-
ards, particularly if it is operated by inadequately
trained personnel or if it is not serviced properly:
For any operation of this unit, the operator must
prepare written instructions in a reasonable form
and in the language of the operating personnel
based on these service instructions (Germany:
UVV VBG 1 § 7, 2).
Use these service instructions to familiarize the
operating personnel with the functions, operation,
and maintenance of the unit.
The contents of the service instructions are sub-
ject to change without further notice.
Concerning translations into foreign languages,
the German version of these service instructions
is binding.
For safety reasons, unauthorized modifications or
reconditioning of the unit are prohibited.
Keep these service instructions close to the unit
so that safety instructions and important informa-
tion are always accessible.
Trademarks:
®
HERAsafe is a registered trademark of Kendro
Laboratory Products GmbH. All other trademarks
mentioned in the service instructions are the exclusive
property of the respective manufacturers.
Copyright
©
Kendro Laboratory Products GmbH
Edition:
January 2000
Valid: 05.2001 / 50060091 / A
1.2

Notes for the service personnel

Please note that repairs at the unit must be carried out
by adequately trained personnel only.
Spare parts shall be replaced by authorized per-
sonnel only
Electrical work must be carried out by trained
electrical personnel only.
Installations of gas supply lines and gas compo-
nents must be carried out by trained personnel
only.
The safety and reliability of the unit are ensured
only if spare parts approved by Kendro Laboratory
Products are used. The use of other parts pres-
ents potential hazards and is therefore prohibited.
For safety reasons, unauthorized modifications or
reconditioning of the unit are prohibited.
Before installing the spare parts, please read
these service instructions carefully.
For your safety please contact Kendro Laboratory
products immediately if you encounter problems
that are not mentioned in this service instructions.
Mail address
Kendro Laboratory Products
31 Pecks Lane
Newtown, CT 06470-2237
USA
Phone:
Fax:
e-mail:
• 7 •
1(800) 522-7746
1(203) 270-2166
Info@kendro.com