Bay-Tek Hyper Nova Service Manual page 13

HYPERNOVA GAME SETUP
Connect the CE23014 cable to the CE23043 cable as shown.
Push the excess cable length back into the cabinet.
- Do the same to the other side.
Remove the black plastic access panel by removing the
4 screws using a Phillips screwdriver.
Reach inside and connect the 11 cables from the top
section to the lower section:
CE23036 to CE23035
CE23005 to CE23004
CE23013 to CE23014
CE23012 to CE23002
CE23023 to CE23024
USB cable to USB cable
Ground Wire to Ground Wire
CE23006 to CE23051
CE23007 to CE23051
CE23013 (black connectors) to CE23049
CE23013 (gold connectors) to CE23047
Remove the white plastic piece and store inside the
cabinet - just in case the top needs to be brought
back down to move game or to gain access to lower
section.
13