Bay-Tek Hyper Nova Service Manual page 8

HYPERNOVA GAME SETUP
Unbox upper cabinet.
Remove the 5 Allen bolts from 1 side plexi window using a
5/32" Allen wrench. Save for later installation.
Remove the 2 shipping bolts from the
bottom of upper cabinet using a 9/16"
socket. These bolts can be discarded.
Remove the shaft collar from the top inside upper
cabinet using a 5/32" Allen wrench.
Slide the shaft collar and warning tag down the shaft to the
bottom of the upper cabinet.
Lift the shaft upward and remove the collar and warning tag.
These can be discarded, they are only used during shipping.
Remove the white plastic plug from the bottom of the upper
cabinet by removing the 3 screws using a # 2 square bit.
This white plastic piece can be discarded.
It is only used during shipping.
Before removing the upper cabinet from the pallet—re-install one of the screws back into the side
plexi to keep the plexi side closed.
Remove the upper cabinet from the pallet and lay down on it's back near the game's final position.
8