How To Fine Tune Propeller Calibration - Bay-Tek Hyper Nova Service Manual

HOW TO FINE TUNE PROPELLER CALIBRATION

The sensor that determines the position of the propeller is calibrated by our factory.
However, if the motherboard or the sensor is replaced, it may be necessary to fine
tune the sensor using the options in the menu.
Theory of Operation:
The "Win Location" is determined by a sensor mounted in the
roof of the cabinet.
Once the highest point of the spinning propeller is calibrated,
the software will place a pointer on the display board.
This pointer is 2 LED's thick.
The placement on the display board will always be 2 LED's
thick and never span a ticket value dividing line.
The playfield is divided into 3 sections:
Dividing line between upper section and middle section.
Dividing line between middle section and lower section.
Upper Section
Middle Section
Lower Section
43
Factory
Calibration
Target
Factory
Calibration
Target
Factory
Calibration
Target