Bay-Tek Hyper Nova Service Manual page 12

HYPERNOVA GAME SETUP
Insert 4 black bolts from inside the plexi down into
the lower cabinet using a 1/4" Allen wrench.
Open the rear bottom door.
Reach inside rear bottom door and insert 2 bolts,
washers, and split washers upward into the top
cabinet. Tighten using a 3/4" socket.
Use a rag to wipe the shaft from top to bottom.
Residue may have accumulated during shipping.
Lift shaft and place the propeller onto shaft.
Be sure to install with writing up.
The shaft is meant to be free floating. Lower shaft back down into place in the hub.
Both front rails have LED lights that can now be plugged in.
Feed the light cable down through the hole.
12