Bay-Tek Hyper Nova Service Manual page 44

HOW TO FINE TUNE PROPELLER CALIBRATION
Be aware that players observation of the height reached by the propeller can vary greatly depending
Do not make changes to the calibration on the advise of customers.
If the game seems to show the propeller incorrectly
Enter the menu and scroll to "Cal Upr"
The arrow will move 2 LED's width up with every increased value.
It will move 2 LED's width down with every decreased value.
If the game seems to show the propeller incorrectly
Enter the menu and scroll to "Cal Mid"
The arrow will move 2 LED's width up with every increased value.
It will move 2 LED's width down with every decreased value.
If the game seems to show the propeller incorrectly
Enter the menu and scroll to "Cal Low"
The arrow will move 2 LED's width up with every increased value.
It will move 2 LED's width down with every decreased value.
Note: The adjusting on this page is only a quick estimate of propeller height.
Refer to the next section "Propeller/Sensor
on the height of the observer.
in this Upper Section:
in this Middle Section:
in this Lower Section:
To scientifically calibrate the propeller height,
44
Upper Section
Middle Section
Lower Section
Calibration"