Programmed Operation - Beckman Coulter Optima L Series Instructions For Use Manual

Accel (Acceleration)
The instrument has two acceleration profiles: maximum (
1
Press the
The run status indicator for the selected setting will light.
Decel (Deceleration)
The instrument has three deceleration profiles:
1
Press the
The run status indicator for the selected setting will light.

Programmed Operation

PROG (Program) and SAVE
Up to nine sets of user-specified run conditions, called programs, may be stored. Each program is
stored by number and can be recalled by using the keypad. Programs are retained in memory even
when the power is turned off.
You can select an existing program by pressing the program number (1 to 9) on the keypad, or by
pressing the
To create or modify a program:
1
Press
PROG
• If no program has been previously selected, a dash will appear above the
• Actual values remain in the other displays.
2
Use the keypad to select a program number, which replaces the dash in the display.
a. Or, continue pressing
The program number blinks to indicate that you are editing the program.
3
Use the parameter keys and keypad to enter the run settings.
a. After all parameters have been entered, press
The
PN LL-IM-12AB
key repeatedly to toggle between the settings.
ACCEL
key repeatedly to toggle between the settings.
DECEL
key repeatedly until the required set of parameters appears.
PROG
.
until the required program number appears.
PROG
indicator will begin to blink to indicate that you may save the program.
SAVE
) and
MAX SLOW
, , and
MAX SLOW NO BRAKE
.
ENTER/RECALL
Run Preparation
Programmed Operation
.
.
key.
PROG
2-7
2