Program Start - JUMO IPC 300 Operating Manual

7 Setup program

7.3 Program start

Diagnostics
H
78
h Run the setup program using the Windows® start menu
h Connect the USB micro socket of the power controller to a USB socket on
the PC using the supplied cable
h Click Connect in the menu bar
The diagnosis window appears at the bottom of the screen and shows the de-
vice info and the current measurement data. The connection has been estab-
lished.
The power controller supplies no power while setup data is being transferred
"to the device". The device restarts after the transfer.
V1.00/EN/00741192/2021-03-30 [IPC 300]]