Screw Terminals For Control Electronics - JUMO IPC 300 Operating Manual

3.2 Screw terminals for control electronics

Position
Tools
Terminal
X8_1, X8_2,
X2
X1
X10_1, X10_2
X16
V1.00/EN/00741192/2021-03-30 [IPC 300]
The screw connections for the control electronics are the same for type
709051/X-XX-070... or 709051/X-XX-100... and type 709051/X-XX-200..., and
are shown in the following image.
- Flat-blade screwdriver, blade width 2.5 and 3.5 mm
Type 709051/X-XX-070... or type 709051/X-XX-100...
Type 709051/X-XX-200...
Version
Slotted screws,
blade width 2.5 mm
Push-in terminals
Slotted screws,
blade width 3.5 mm
Slotted screws,
blade width 2.5 mm
Slotted screws,
blade width 3.5 mm
3 Electrical connection
Conductor cross
section
2
0.2 to 1.5 mm
2
0.14 to 1.5 mm
2
0.2 to 4 mm
2
0.2 to 1.5 mm
2
0.2 to 4 mm
Maximum
tightening
torque
0.25 Nm
-
0.5 Nm
0.25 Nm
0.5 Nm
29