Table of Contents
Advertisement
5.1 Configuration level
All parameters are listed in the following tables. Depending on the configura-
tion, any parameters that are not required are hidden.
Scroll bar
Navigation
Numerical entry
or
selection
V1.00/EN/00741192/2021-03-30 [IPC 300]
The configuration level contains parameters for configuring the power control-
ler.
If the parameters at this level are modified during operation, the power control-
ler is locked (Inhibit) as a result. It does not provide any power in this state.
When exiting the configuration level with the
continues operation with the modified parameters.
This level can be locked with a password.
However, no password is set per default.
v Chapter 5.1.11 "Change codes"
The configuration level can be accessed from the overview of measured val-
ues by pressing the following keys:
h In the overview of measured values, press the
h Select the configuration level and press
The parameters are combined in the following groups, which are explained in
detail as sub-chapters in the tables on the following pages.
The entry highlighted in black is selected and contains further parameters.
If there are more than three entries in one level, a scroll bar that shows the cur-
rent position in the menu appears.
Once you have reached the required parameter, the
be used to enter a numerical value or a setting.
5 Configuration
key, the power controller
key
and
keys can
49
Advertisement
Table of Contents
