Correct Wiring Of All Components - JUMO IPC 300 Operating Manual

2 Mounting

2.1.1 Correct wiring of all components

EMI filter
A
The EMI filters may only be used for interference suppression of the IPC 300.
Other devices, such as controllers, power supply units etc. must be suppressed,
where necessary, with their own EMI filters. Do not connect these devices in par-
allel to the IPC 300 on the load side of the EMI filter.
16
The IPC 300 may only be used in conjunction with a suitable filter (ac-
cessories). If a different filter is used, it must be of equal or better
characteristics. Otherwise, inductive voltages may be introduced into
the supply network. We decline any liability for damage caused as a
result.
The leakage current of the IPC 300 with upstream mains filter is less than
V1.00/EN/00741192/2021-03-30 [IPC 300]