Setpoint Specification Via Potentiometer - JUMO IPC 300 Operating Manual

6.4 Setpoint specification via potentiometer

V1.00/EN/00741192/2021-03-30 [IPC 300]
h Press the
key to apply the current load state as the OK state.
For this, a 5 kΩ potentiometer is connected to the voltage input.
It is supplied with DC 10 V at terminal 5 of the power controller.
S
A
E
h Configuration level
h Configuration level
voltage input
Now the power controller power is preset via the external potentiometer.
6 Special device functions
r r
Analog inputs Set voltage range 0 to 10 V
r
Setpoint value config.
r
Default setpoint value
r
Set
69