Connecting The Power - Raven AccuBoom Miller Condor Series Installation Manual

Connecting the
Power
1. Locate the battery box near the access ladder. (See Figure 4)
2. Route the AccuBoom harness power lead to the battery box and
connect directly to the battery. (See Figure 5)
Figure 5: Connect Power Lead to the Battery.
3. Neatly secure any excess harness using the supplied zip ties.
4. Installation is complete.
Note:
instructions on setting up the software and using the
AccuBoom system.
Figure 4: Battery Box
Refer to the specific console operator's manual for
Manual #016-1001-053
5