Advertisement
Mounting the
CAN Node
Use the following procedure to properly install the CAN AccuBoom
system.
1. Locate the center rack cross-member on the right rear corner of chassis.
2. Attach the CAN node mounting bracket to the cross-member using the
supplied U- bolts and hardware. (See Figure 1)
3. Attach the CAN node to the CAN node mounting bracket using
supplied Hardware. (See Figure 1)
Figure 1: Mounting CAN Node
Manual #016-1001-053
C
H A P T E R
I
NSTALLATION
C
2
HAPTER
3
Advertisement
