Advertisement
Basic Kit
Contents
Congratulations on your purchase of the Raven AccuBoom system! This
system is designed to provide worry free turn-on and turn-off of your
booms with respect to the as-applied coverage map. The following
instructions are designed to assist you in the proper installation of the
AccuBoom system. See the installation and Operation Manual of your
particular console for instructions on setting up the software and using the
AccuBoom system.
• AccuBoom CAN Node
• Machine Specific Cable (P/N 115-1001-019)
• CAN Tee Cable 24' Long (P/N 115-0171-36)
• Install Manual (P/N 016-1001-053)
• Node Mounting Kit (P/N 117-0171-186)
Note:
an additional CAN Power Tee Kit is required.
Important:
position while AccuBoom control is in operation.
If no CAN system currently exists on the machine,
All boom switches must be in the ON
Manual #016-1001-053
C
H A P T E R
I
NTRODUCTION
C
1
HAPTER
1
Advertisement
