Flowserve FlowTop V726 Disassembly/Reassembly Instructions page 26

6
D is asse m bly
S t ep 03
• Unscrew hexagon nuts (1.4)
R e asse m bly
S tep 03
• Grease stud screws
CAUT ION !
Lubrication as per Table 06 (Page 65)
• Screw hexagon nuts in place (1.4) and tighten in a
diagonally opposite sequence using the torque wrench
CAUT ION !
Nut tightening moment (1.4)
as per Table 01 (Page 64)
When tightening the nuts pay attention to the
alignment of the plug ( do not rub or insert the
plug in the open / closed movement )
Schmidt Armaturen
AI - FlowTop