NDS ConductOR User Manual page 42

Comment: In the Receive Unit Setup section, Display 1 is used for illustration.
Receive Unit Setup:
Connect the Receive unit's OUT 1 (Connector Panel is shown on page 3) to a compatible display. On the
Receive unit's Home screen (page 9) touch the Select Inputs icon.
On the Select Display row touch the
On the Primary row touch the Change button.
The Primary Input screen is displayed. Touch the LAN button. Finally, touch the Go Back button to
return to the Select Inputs screen.
Verify that LAN appears in the Primary row window. An image of the
Transmit unit's DVI-2
OUT 1.
Streaming Audio is described on the following page.
35
Display 1
input (page 28) should appear on the display connected to the Receive unit's
icon.
DVI signal applied to the