Location To Location Network Connections; Software Setup - NDS ConductOR User Manual

Or informatics system
Table of Contents

Advertisement

Streaming Video and Audio from Location to Location
Overview:
If surgeons or other clinical staff members need to consult with their colleagues at another location and
each location has a ConductOR available. The ConductORs may be connected via your internal network
or the Internet for the purpose of video and audio communication. Video transmitted from the
ConductOR designated as
'Transmit'
and video viewed on the ConductOR designated as 'Receive'. The
audio is bidirectional, allowing the staff at each location to converse with each other.
HD Video
camera
Transmit
Receive
9

Location to Location Network Connections

Connect the ConductOR units to your facility's internal network using Category 5 Ethernet cable.
Note:
For clarity only the Network connections are shown in the illustration below.

Software Setup

is detailed on the following pages.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

90t0007

Table of Contents